Procedure: Select Near End Pms On The Performance Monitoring Screen; Procedure: Select Far End Pms On The Performance Monitoring Screen; Figure 8-3 Near End And Far End Buttons On The Card View Performance Tab - Cisco 15454-TCC - Network Processor Card Operation Manual

Chapter 8 Performance Monitoring
Figure 8-3
Near End and Far End buttons

Procedure: Select Near End PMs on the Performance Monitoring Screen

Open the electrical or optical card of choice. Double-click the card's graphic in the main (node) view or
Step 1
right-click the card and select Open Card. (Clicking a card once highlights the card only.)
From the card view, click the Performance tab.
Step 2
Step 3 Click the Near End button.
Click the Refresh button. All PMs occurring for the selected card on the incoming signal are displayed.
Step 4

Procedure: Select Far End PMs on the Performance Monitoring Screen

Open the electrical or optical card of choice. To do so, double-click the card's graphic in the main (node)
Step 1
view or right-click the card and select Open Card. (Clicking a card once highlights the card only.)
From the card view, click the Performance tab.
Step 2
Step 3 Click the Far End button.
Click the Refresh button. All PMs recorded by the far-end node for the selected card on the outgoing
Step 4
signal are displayed.
November 2001
Near End and Far End buttons on the card view Performance tab
Using the Performance Monitoring Screen
Cisco ONS 15454 Installation and Operations Guide
8-5