Cisco 15454-TCC - Network Processor Card Operation Manual page 269

Chapter 7 Card Provisioning
Table 7-6
Subtab
Thresholds -
Section
Thresholds -
Path
STS
Alarming
Step 5 Click Apply.
November 2001
EC1-12 Card Parameters (continued)
Parameter Description
CV Coding violations
ES Errored seconds
SES Severely errored seconds
SEFS Severely errored framing
seconds
CV Coding violations
ES Errored seconds
FC Failure count
SES Severely errored seconds
UAS Unavailable seconds
STS # EC-1 port (Line #) and STS #
available for Intermediate Path
Performance Monitoring.
Enable IPPM Enables IPPM for the EC-1 port
and STS #
Port Port number
Profile Sets the alarm profile for the
port.
Suppress Suppresses alarm display for the
Alarms port.
Options
Numeric. Defaults (Near End
only):
10000 (15 minutes)
100000 (1 day)
500 (15 minutes)
5000 (1 day)
500 (15 minutes)
5000 (1 day)
500 (15 minutes)
5000 (1 day)
Numeric. Defaults (Near and Far
End):
15 (15 minutes)
125 (1 day)
12 (15 minutes)
100 (1 day)
10 (15 minutes)
10 (1 day)
3 (15 minutes)
7 (1 day)
10 (15 minutes)
10 (1 day)
Unchecked (default); IPPM not
enabled
Checked; IPPM is enabled
1 - 12
Default
Inherited
Custom profiles (if any)
Unselected (default)
Selected
Cisco ONS 15454 Installation and Operations Guide
Provisioning Electrical Cards
7-17