Appendix; Radius Attributes; Radius Ietf Attributes - Cisco 10000-2P2-2DC Software Configuration Manual

RADIUS Attributes

This appendix lists the RADIUS attributes that the Cisco 10000 series router supports in Cisco IOS
Release 12.2(4)BZ1 and later releases. The following conventions are used in the tables that follow:
•
•
•
Note For more information, see the "RADIUS Attributes" appendix in the Cisco IOS Security Configuration
Guide, Release 12.2.

RADIUS IETF Attributes

Table A-1
Number
1
2
3
4
5
6
7
8
9
10
11
12
OL-2226-23
Supported and tested—The attribute has been tested and the Cisco 10000 series router supports it.
Not Supported—The Cisco 10000 series router does not support the attribute.
Not Applicable—The attribute does not apply to the Cisco 10000 series router.
RADIUS IETF Attributes
IETF Attribute
User-Name
User-Password
CHAP-Password
NAS-IP Address
NAS-Port
Service-Type
Framed-Protocol
Framed-IP-Address
Framed-IP-Netmask
Framed-Routing
Filter-ID
Framed-MTU
A P P E N D I X
Status
Supported and tested
Supported and tested
Supported and tested
Supported and tested
Supported and tested
Supported and tested
Supported and tested
Supported and tested
Supported and tested
Router receives this attribute and
properly handles a value of 0:None.
Unclear if the system properly handles
a value of 3:send and listen.
Supported and tested
Supported and tested
Cisco 10000 Series Router Software Configuration Guide
A
A-1