Cisco 10000-2P2-2DC Software Configuration Manual page 57

10000 series
Table of Contents

Advertisement

Chapter 1
Broadband Aggregation and Leased-Line Overview
IP SLAs—LSP Health Monitor in the IP SLAs—LSP Health Monitor feature guide, located at the
following URL:
http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a0080528450.html
IPv6 in
L2TP Congestion Avoidance in the L2TP Congestion Avoidance feature guide, located at the
following URL:
http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a00805f040e.html
Layer 2 Local Switching in
Link Fragmentation Interleave Over Frame Relay (FRF.12) in the Cisco 10000 Series Router Quality
of Service Configuration Guide, located at the following URL:
http://www.cisco.com/en/US/products/hw/routers/ps133/products_configuration_guide_book0918
6a00805b9497.html
Logging to Local Non-Volatile Storage (ATA Disk) in the Syslog Writing to Flash feature guide,
located at the following URL:
http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a0080611212.html
MLP Connections in
MLPPP with Link Fragmentation Interleave (LFI) in the
Service Configuration
http://www.cisco.com/en/US/products/hw/routers/ps133/products_configuration_guide_book0918
6a00805b9497.html
MPLS Carrier Supporting Carrier (also known as MPLS VPN—Carrier Supporting Carrier) in the
following feature guides. These guides are located at the following URL:
http://www.cisco.com/en/US/products/ps6566/products_feature_guides_list.html
MPLS Embedded Management—LSP Ping/Traceroute and AToM VCCV in the MPLS Embedded
Management—LSP Ping/Traceroute and AToM VCCV feature guide, located at the following URL:
http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a008063d009.html
MPLS Egress Netflow Accounting in the MPLS Egress Netflow Accounting feature guide, located
at the following URL:
http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a0080611269.html
MPLS High Availability Overview in the MPLS High Availability: Overview feature guide, located
at the following URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/products_feature_guide09186a00805ad
326.html
Note
NSF/SSO—MPLS LDP and LDP Graceful Restart in the NSF/SSO—MPLS LDP and LDP Graceful
Restart feature guide, located at the following URL:
OL-2226-23
Chapter 24, "Configuring IP Version 6"
Chapter 20, "Configuring L2 Virtual Private Networks"
Chapter 22, "Configuring Multilink Point-to-Point Protocol Connections"
Guide, located at the following URL:
LDP: MPLS VPN—Carrier Supporting Carrier
BGP: MPLS VPN—Carrier Supporting Carrier—IPv4 BGP Label Distribution
In Cisco IOS Release 12.2(28)SB, the Cisco 10000 series router supports Route Processor
Redundancy Plus (RPR+) and Stateful Switchover (SSO). However, for broadband aggregation
features the router supports RPR+ only.
New Features, Enhancements, and Changes
Cisco 10000 Series Router Quality of
Cisco 10000 Series Router Software Configuration Guide
1-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

1000510008

Table of Contents