Table of Contents
Advertisement
Chapter 16
Configuring RADIUS Features
•
•
•
•
Feature History for RADIUS Transmit Retries
Cisco IOS Release
12.3(7)XI1
12.2(28)SB
Restrictions for RADIUS Transmit Retries
The extended range of RADIUS transmit retries has the following restrictions:
•
•
Configuring RADIUS Transmit Retries
To configure RADIUS transmit retries, enter the following command in global configuration mode:
Command
Router(config)# radius-server host {hostname |
ip-address} retransmit retries
For more information about available options for the radius-server command, see the Cisco IOS
Note
Command Reference documentation for Cisco IOS Release 12.2.
Configuration Example for RADIUS Transmit Retries
Example 16-1
Example 16-1 Configuring RADIUS Transmit Retries
Router(config)# radius-server host 10.16.1.2 retransmit 5
OL-2226-23
Restrictions for RADIUS Transmit Retries, page 16-43
Configuring RADIUS Transmit Retries, page 16-43
Configuration Example for RADIUS Transmit Retries, page 16-43
Monitoring and Troubleshooting RADIUS Transmit Retries, page 16-44
Description
This feature was integrated into Cisco IOS Release 12.3(7)
XI1.
This feature was integrated into Cisco IOS Release
12.2(28)SB.
Using a value at the upper limits of the range of RADIUS transmit retries can force the router to
retry for up to 24 hours.
Using an extended value for RADIUS transmit retries can exhaust the amount of available and
allocated buffers.
configures the router to retransmit up to 5 times to the RADIUS server.
Purpose
Specifies the number of times the router retransmits to the
RADIUS server.
The retries option is a value from 1 to a number greater than
17280.
Cisco 10000 Series Router Software Configuration Guide
RADIUS Transmit Retries
Required PRE
PRE2
PRE2
16-43
Advertisement
Table of Contents
Troubleshooting
