Ethernet To Vlan-Bridged Interworking; Configuring L2Vpn Interworking - Cisco 10000-2P2-2DC Software Configuration Manual

Bridged Interworking
Ethernet to VLAN—Bridged Interworking
In Ethernet Interworking, also called bridged interworking, Ethernet frames are bridged across the
pseudowire. The customer edge (CE) routers can bridge Ethernet, or can route using a bridged
encapsulation model, such as Bridge Virtual Interface (BVI) or Routed Bridged Encapsulation (RBE).
The provider edge (PE) routers operate in the Ethernet like-to-like mode.
The Ethernet to VLAN (Bridged) feature is described in the following topics:
•
•
•

Configuring L2VPN Interworking

To enable L2VPN Interworking, you must add the interworking command to the list of commands that
comprise of the pseudowire. The interworking command cause ACs to be terminated locally.
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
pseudowire-class name
Example:
Router(config)# pseudowire-class class1
Cisco 10000 Series Router Software Configuration Guide
21-2
Configuring L2VPN Interworking, page 21-2
Verifying the Configuration, page 21-3
Configuration Examples of Ethernet to VLAN—Bridged, page 21-3
enable
configure terminal
pseudowire-class name
encapsulation mpls
interworking ethernet
Chapter 21
Purpose
Enables privileged EXEC mode. if prompted, enter your
password.
Enters global configuration mode.
Establishes a pseudowire class with a name that you specify.
Enters pseudowire class configuration mode.
Configuring L2VPN Interworking
OL-2226-23