Table of Contents
Advertisement
Verifying VPN Operation
Configuring RADIUS User Profiles for RADIUS-Based AAA
Use the per VRF AAA feature to partition authentication, authorization, and accounting (AAA) services
based on a virtual routing and forwarding (VRF) instance. This feature allows the Cisco 10000 router to
communicate directly with the customer RADIUS server without having to go through a RADIUS proxy.
For more information about configuring the per VRF AAA feature on the Cisco 10000 series router, see
the
For more information about configuring your RADIUS server, see your RADIUS documentation.
Verifying VPN Operation
To verify VPN operation, enter any of the following commands in privileged EXEC mode:
Command
Router# show ip vrf
Router# show ip vrf [{brief | detail |
interfaces}] vrf-name
Router# show ip route vrf vrf-name
Router# show ip protocols vrf vrf-name
Router# show ip interface interface-number
Router# show ip bgp vpnv4 all [tags]
Router# show tag-switching forwarding vrf
vrf-name [prefix mask/length][detail]
Configuration Examples for RA to MPLS VPN
This section provides configuration examples for the following configurations:
•
•
•
Cisco 10000 Series Router Software Configuration Guide
3-30
"Optional Configuration Tasks for LAC" section on page
PPPoA to MPLS VPN Configuration Example, page 3-31
PPPoE to MPLS VPN Configuration Example, page 3-34
RBE to MPLS VPN Configuration Example, page 3-38
Chapter 3
5-7.
Purpose
Displays the defined VRFs and interfaces.
Displays information about defined VRFs and associated
interfaces.
Displays the IP routing table for a VRF.
Displays the routing protocol information for a VRF.
Displays the VRF table associated with an interface.
Displays information about all BGPs.
Displays label forwarding entries that correspond to VRF routes
advertised by this router.
Configuring Remote Access to MPLS VPN
OL-2226-23
Advertisement
Table of Contents
Troubleshooting
