Transparent - Cisco CSS11501S-C-K9 Configuration Manual

Configuration Command Set
Related Commands

transparent

Syntax Description
Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-186
Using the no form of the command disables TLS version 1 protocols. You cannot
disable SSL version 2 and 3 and TLS protocols. The command no tlsv1 enable is
not available in FIPS mode.
sslv2 enable(Server Configuration Command Set)
sslv3 enable (Server Configuration Command Set)
Enables to servers to function as a transparent proxy (default).
transparent [local-listen]
no transparent [local-listen]
local-listen
Availability: Serial, Telnet; FIPS Mode (serial only)
The no form of the command is used to disable the specified behavior. The
following table presents the device behavior associated with each command
permutation.
Command
transparent
Keyword specifying a third transparency mode; see
the table in the Usage Guidelines below.
Behavior
The device listens on the hardware server's IP
address for incoming client connections and uses
the client's IP address for connecting to the
hardware server. This is default behavior.
Appendix C Command Summary
78-13124-06