Sslport; Sslv2 Enable - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary
Usage Guidelines

sslport

Syntax Description
Usage Guidelines
Related Commands

sslv2 enable

Usage Guidelines
78-13124-06
Availability: Serial, Telnet; FIPS Mode (serial only)
The default behavior is failhtml.
Specifies the port on which the logical secure server receives SSL traffic. The SSL
traffic is decrypted and sent to the physical server using the TCP service port
previously specified with the remoteport command.
sslport <port|default>
port
default
Availability: Serial, Telnet; FIPS Mode (serial only)
Note This command has the same effects as the localport
command and is included only for backwards compatibility.
localport (Server Configuration Command Set)
remoteport (Server Configuration Command Set)
Enables SSL version 2 protocols.
sslv2 enable
no sslv2 enable
Availability: Serial, Telnet
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The TCP service port through which SSL traffic is
received by the current secure logical server.
Returns the setting to the default of 443.
Configuration Command Set
C-183