Ssl Configuration Command Set; Backend-Server - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary

SSL Configuration Command Set

backend-server

Syntax Description
Usage Guidelines
Related Commands
78-13124-06
Use these commands to set up and manage the SSL configuration for the current
Secure Content Accelerator. Enter the SSL Configuration mode by using the
enable command in the Non-Privileged Mode, configure command in the
Privileged Mode, and the ssl command in Configuration Mode. The prompt
changes to
<config-ssl[devicename]>>
Creates and/or configures the specified backend server and enters Backend Server
Configuration mode for that server.
backend-server <servname> [create]
no backend-server <servname>
servname
create
Availability: Serial, Telnet; FIPS Mode (serial only)
The no form of the command is used to remove the specified backend server. A
device can have a total of 255 (SCA) or 4095 (SCA2) servers in any combination
of backend, reverse-proxy, or standard secure servers. When a backend server has
been specified for removal, all connections are allowed to finish before the
backend server is actually removed. Backend server names can consist of Arabic
numerals and upper- and lowercase alphabetic, underscore (_), hyphen (-), and
period (.) characters. Backend server names must begin with an alphabetic
character or underscore and have a limit of 15 characters.
show ssl (Non-Privileged Command Set)
show ssl server (Non-Privileged Command Set)
See the section "Backend Server Configuration Command Set".
Cisco 11000 Series Secure Content Accelerator Configuration Guide
.
The name of the backend server.
Creates a new backend server named servname and
enters Backend Server Configuration mode for that
object.
Configuration Command Set
C-113