Appendix C Command Summary; Editing And Completion Features; Table C-2 Key Reference - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary
Note

Editing and Completion Features

78-13124-06
Though a command string may be displayed on multiple lines in this
guide, it must be entered on a single line with not returns except at
the end of the complete command.
You can use individual keys and control-key combinations to help you work with
the Command Line Interface (CLI). Table C-2 describes the key and key
combination functions.
Table C-2 Key Reference
Key(s) Function
TAB Completes the current word
? Shows possible command completions
CTRL+A Moves cursor to the beginning of the command line
CTRL+B Moves cursor to the previous character
CTRL+C Exits the QuickStart wizard at any point; the configuration is
not saved
CTRL+D When editing a command, deletes the character to the right
of the cursor; otherwise, exits current configuration level or
exits the configuration manager if at the Top Level
CTRL+E Moves cursor to the end of the command line
CTRL+F Moves cursor to the next character
CTRL+K Erases characters from the cursor to the end of the line
CTRL+L Clears the screen
CTRL+N Displays the next command in the command history
CTRL+P Displays the previous command in the command history
CTRL+U Erases characters from the cursor to the beginning of the line
CTRL+W Erases the previous word
CTRL+Z Leaves current mode and returns to Top Level mode
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Editing and Completion Features
C-3