Traceroute - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary
Related Commands

traceroute

Syntax Description
Usage Guidelines
78-13124-06
show terminal (Non-Privileged Command Set)
terminal baud (Non-Privileged Command Set)
terminal history (Non-Privileged Command Set)
terminal length (Non-Privileged Command Set)
terminal pager (Non-Privileged Command Set)
terminal reset (Non-Privileged Command Set)
Displays the router information to the specified destination.
traceroute <ipaddr|name> [query <numretries>] [hop <numhops>]
ipaddr
name
query
numretires
hop
numhops
Availability: Serial, Telnet; FIPS Mode (serial only)
When issued from a serial or telnet connection, the command returns information
based upon the device's hardware.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The destination IP address.
The name of the destination host (serial or telnet only).
Keyword indicating a set number of retries should be
initiated.
Specifies the number of retries to use.
Keyword indicating a set number of hops should be
traced.
The number of hops to trace.
Top Level Command Set
C-67