Certificate Configuration Command Set; Binhex; Der - Cisco CSS11501S-C-K9 Configuration Manual

Configuration Command Set

Certificate Configuration Command Set

binhex

Syntax Description
Usage Guidelines

der

Syntax Description
Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-138
Use Certificate Configuration commands to set up and manage certificate objects.
Enter Certificate Configuration mode by using the enable command in
Non-Privileged mode, the configure command in Privileged Mode, the ssl
command in Configuration mode, and the cert command in SSL Configuration
mode. The prompt changes to
Pastes a binary hex-encoded X509 certificate into the configuration manager.
binhex [value]
value
Availability: Serial, Telnet; FIPS Mode (serial only)
After the command is entered, you are prompted to paste the certificate from the
cut buffer. You can use a text editor to copy the certificate from a file. After the
certificate is pasted, you must press Enter twice to complete the command.
Loads a DER-encoded X509 certificate file into the current object.
der [url]
url
Availability: Serial, Telnet; FIPS Mode (serial only)
If you do not enter the URL, you are prompted for it.
<config-ssl-cert[certname]>>
The certificate that has been copied into the cut buffer.
The location of the file.
Appendix C Command Summary
.
78-13124-06