Appendix C
Command Summary
Related Commands
sntp interval
Syntax Description
Usage Guidelines
Related Commands
78-13124-06
no snmp (Configuration Command Set)
show snmp (Non-Privileged Command Set)
snmp access-list (Configuration Command Set)
snmp contact (Configuration Command Set)
snmp default community (Configuration Command Set)
snmp enable (Configuration Command Set)
snmp location (Configuration Command Set)
snmp trap-host (Configuration Command Set)
snmp trap-type enterprise (Configuration Command Set)
Sets polling interval for all configured SNTP servers.
sntp interval <seconds>
seconds
Availability: Serial, Telnet; FIPS Mode (serial only)
The default interval is 86400 seconds (one day), the minimum and maximum
intervals are 60 and 2419200 (one month), respectively. The interval can be
displayed using the commands show device, show sntp and write terminal.
show device (Non-Privileged Command Set)
show sntp (Non-Privileged Command Set)
sntp server (Configuration Command Set)
write terminal (Privileged Command Set)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The number of seconds between polls.
Configuration Command Set
C-103