Cisco CSS11501S-C-K9 Configuration Manual page 222

Command Listing
Table C-14 Server Configuration Command Description (continued)
Command
info, page 175
ip address, page 175
keepalive enable, page 176
keepalive frequency,
page 176
keepalive maxfailure,
page 177
key, page 177
localport, page 178
log-url, page 178
remoteport, page 179
session-cache enable,
page 181
session-cache size,
page 181
session-cache timeout,
page 182
sharedcipher error, page 182
sslport, page 183
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-28
Description
Displays current information about the logical
secure server being edited or created.
Sets the specified IP address for the logical secure
server.
Allows keepalive messages to be sent to the
hardware server corresponding to the current virtual
server.
Specifies the interval between keepalive messages.
Specifies the number of failed keepalive responses
before the virtual server is set to "suspended".
Sets the specified key for use by the server.
Specifies the port on which the secure server
receives SSL traffic. The SSL traffic is decrypted
and sent to the real server using the TCP service port
previously specified with the remoteport command.
Specifies a host for logging of URL requests.
Specifies the TCP service port through which
non-secure connections is sent.
Enables session caching.
Specifies the size of the session cache.
Specifies the session cache length before being
timed out.
Specifies device behavior when an error caused by
no cipher agreement is encountered.
Specifies the port on which the logical secure server
receives SSL traffic. The SSL traffic is decrypted
and sent to the physical server using the TCP service
port previously specified with the remoteport
command.
Appendix C Command Summary
78-13124-06