Cisco CSS11501S-C-K9 Configuration Manual page 224

Command Listing
Table C-15 TCP Tuning Configuration Command Description (continued)
Command
maxseg, page 194
mtu, page 195
nodelay, page 196
nopush, page 196
probe-max, page 197
probe-min, page 198
push-all, page 199
rto-def, page 199
rto-max, page 200
rto-min, page 201
slow-start, page 202
stdurg, page 202
ts, page 203
wnd-scale, page 204
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-30
Description
Specifies the maximum TCP segment size.
Specifies the size of the maximum IP unit
transmitted.
Controls the use of the Nagle algorithm.
Controls whether data is sent if the segment size
(maxseg) is not full.
Specifies the maximum window probe timeout.
Specifies the minimum window probe timeout.
Controls whether data is sent immediately
regardless of the maxseg value or application
completeness.
Specifies the default retransmission timeout.
Specifies the maximum allowable roundtrip timeout
(rto) value.
Specifies the minimum allowable roundtrip timeout
(rto) value.
Controls use of an algorithm determining the rate at
which packets should be injected onto the network
based upon the rate at which acknowledgements are
received.
Controls use of the time stamp TCP option.
Controls use of the time stamp TCP option.
Appendix C Command Summary
78-13124-06