Disabling Vtp (Vtp Transparent Mode) - Cisco WS-C2950-24 Configuration Manual

Chapter 8 Configuring VLANs

Disabling VTP (VTP Transparent Mode)

Command
Step 1
vlan database
Step 2
vtp transparent
Step 3 exit
Step 4
show vtp status
78-6511-05
When you configure the switch for VTP transparent mode, you disable VTP on
the switch. The switch then does not send VTP updates and does not act on VTP
updates received from other switches. However, a VTP transparent switch does
forward received VTP advertisements on all of its trunk links.
Beginning in privileged EXEC mode, follow these steps to configure the switch
for VTP transparent mode:
Purpose
Enter VLAN database mode.
Configure the switch for VTP transparent mode.
The default setting is VTP server.
This step disables VTP on the switch.
Return to privileged EXEC mode.
Verify the VTP configuration.
In the display, check the VTP Operating Mode field.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
Using VTP
8-23