Fcc Class A - Cisco CSS11501S-C-K9 Configuration Manual

Appendix G Regulatory Information

FCC Class A

FCC Class A
Note This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
To maintain compliance with the limits of a Class A digital device, Cisco requires
that you use quality interface cables when connecting to this device. During
testing for certification Category 5 cables were used.
Modifications to this product not authorized by Cisco Systems, Inc.
Caution
could void the FCC approval and negate your authority to operate
the product.
The user may find the following booklet prepared by the Federal Communications
Commission helpful: The Interference Handbook. This booklet is available from
the U.S. Government Printing Office, Washington, D.C. 20402. Stock No.
004-000-00345-4.
For more information regarding the above statement, please contact Cisco
Systems, Inc.; 170 West Tasman Drive; San Jose, CA 95134-1706 USA; telephone
(408) 536-4000.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
G-17
78-13124-06