Push-All; Rto-Def - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary

push-all

Syntax Description
Usage Guidelines
Related Commands

rto-def

78-13124-06
Controls whether data is sent immediately regardless of the maxseg value or
application completeness.
push-all <0|1|on|off|default>
no push-all
0
1
on
off
default
Availability: Serial, Telnet; FIPS Mode (serial only)
Enabling push-all can create excessive traffic because of overhead. Use the no
form of the command to return the push-all to the global value. If no global
settings exist for a parameter, the factory default parameter is used instead.
nopush (TCP Tuning Configuration Command Set)
Specifies the default retransmission timeout.
rto-def <milliseconds|default>
no rto-def
Cisco 11000 Series Secure Content Accelerator Configuration Guide
push-all is disabled.
push-all is enabled.
push-all is enabled.
push-all is disabled.
0 (off); push-all is disabled
Configuration Command Set
C-199