Table C-12 Reverse-Proxy Server Configuration Command Description - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary
Table C-11 Key Configuration Command Description (continued)
Command
pem, page 148
pem-paste, page 149
Table C-12 Reverse-Proxy Server Configuration Command Description
Command
activate, page 150
certgroup serverauth,
page 150
end, page 151
exit, page 151
finished, page 152
help, page 152
info, page 152
localport, page 153
log-url, page 153
secpolicy, page 154
serverauth enable, page 155
serverauth ignore, page 155
78-13124-06
Description
Loads a PEM-encoded X.509 private key into the
key entry.
Allows a PEM-encoded X.509 key to be pasted into
the configuration manager.
Description
Activates the current suspended reverse-proxy
server if enough information has been configured.
Assigns a certificate group to be used for server
certificate authentication.
Exits Reverse-Proxy Server Configuration mode,
activates all changes, and returns to SSL
Configuration mode.
Exits Reverse-Proxy Server Configuration mode,
activates all changes, and returns to SSL
Configuration mode.
Leaves Reverse-Proxy Server Configuration Mode
and returns to Top Level mode.
Displays help information for the specified
command.
Displays current information about the
reverse-proxy server being edited or created.
Specifies the TCP service port through which
non-secure connections are received.
Specifies a host for logging of URL requests.
Creates an association between this server and the
specified security policy.
Enables server certificate authentication.
Specifies the server authentication errors to ignore.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Command Listing
C-25