Backend Server Configuration Command Set; Activate; Certgroup Serverauth - Cisco CSS11501S-C-K9 Configuration Manual

Configuration Command Set

Backend Server Configuration Command Set

activate

Usage Guidelines
Related Commands

certgroup serverauth

Syntax Description
Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-124
Use Backend Server Configuration commands to set up and configure backend
servers. Enter Backend Server Configuration mode by using the enable command in
Non-Privileged mode, the configure command in Privileged mode, the ssl command
in Configuration mode, and the backend-server command in SSL Configuration
mode. The prompt changes to
Activates the current suspended backend server if enough information has been
configured.
activate
Availability: Serial, Telnet; FIPS Mode (serial only)
All backend servers are created as active servers by default.
suspend (Backend Server Configuration Command Set)
Assigns a certificate group to be used for server certificate authentication.
certgroup serverauth <certgroupname>
no certgroup serverauth
certgroupname
Availability: Serial, Telnet; FIPS Mode (serial only)
The no form of the command is used to disable server authentication using the
certificate group. When using the no form of the command, you need not specify
any certificate group name. Only one certificate group can be used.
<config-ssl-backend[servername]>>
The name of the certificate group.
Appendix C Command Summary
.
78-13124-06