Identifying Sca Models; Connecting To Power; Table 2-2 Sca2 Port Led Descriptions - Cisco CSS11501S-C-K9 Configuration Manual

Connecting to Power

Identifying SCA Models

Connecting to Power
Note
Cisco 11000 Series Secure Content Accelerator Configuration Guide
2-8
Table 2-2 SCA2 Port LED Descriptions
LED Name Color
LNK Green
ACT Amber
100 Green
Test Amber
SCA and SCA2 models can be differentiated by the text on the product label.
The Secure Content Accelerator is powered by dual AC power supplies. Before
you install the power cords, ensure that you have read Appendix A for electrical
specifications.
Ensure that the Secure Content Accelerator power switches are in the 0 (off)
1.
position.
Attach the power cables to the Secure Content Accelerator by plugging the
2.
AC power cord connector into the power receptacle at the rear panel.
Plug the power cords into dedicated three-wire grounding receptacles.
3.
Switch the power switches to the 1 (on) position.
4.
Connect the power supplies to different circuits to further ensure
appliance availability.
Chapter 2 Installing the Hardware and Software
State Indication
Off No link established
On Link established
Blinking Transmit activity detected
Off 10Mbps
On 100Mbps
Off Self-diagnostics are successful
On Self-diagnostics are running
78-13124-06