Keepalive Enable; Keepalive Frequency - Cisco CSS11501S-C-K9 Configuration Manual

Configuration Command Set
Syntax Description
Usage Guidelines

keepalive enable

Usage Guidelines
Related Commands

keepalive frequency

Syntax Description
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-176
ipaddr
netmask <mask>
Availability: Serial, Telnet; FIPS Mode (serial only)
Using the no form of the command clears the IP address for the logical secure
server.
Allows keepalive messages to be sent to the hardware server corresponding to the
current virtual server.
keepalive enable
no keepalive enable
Availability: Serial, Telnet; FIPS Mode (serial only)
Using the no form of the command disables sending of keepalive messages.
keepalive frequency (Server Configuration Command Set)
keepalive maxfailure (Server Configuration Command Set)
Specifies the interval between keepalive messages.
keepalive frequency <seconds>
seconds
The IP address to assign to the secure server.
The netmask valid for the IP address.
The number of seconds between keepalive messages;
the range is 1 to 255 seconds (inclusive); the default is
5 seconds
Appendix C Command Summary
78-13124-06