Table C-15 Tcp Tuning Configuration Command Description - Cisco CSS11501S-C-K9 Configuration Manual

Secure content accelerator
Table of Contents

Advertisement

Appendix C
Command Summary
Table C-14 Server Configuration Command Description (continued)
Command
sslv2 enable, page 183
sslv3 enable, page 184
suspend, page 184
tcp-tuning, page 185
tlsv1 enable, page 185
transparent, page 186
urlrewrite, page 187
Table C-15 TCP Tuning Configuration Command Description
Command
2msltime, page 189
delay-ack, page 190
finwt2time, page 191
keepalive, page 191
keepalive-cnt, page 192
keepalive-intv, page 193
max-rexmit, page 193
maxrt, page 194
78-13124-06
Description
Enables SSL version 2 protocols.
Enables SSL version 3 protocols.
Suspends the function of the server.
Enters TCP Tuning Configuration mode at for this
server.
Enables TLS version 1 protocols.
Enables to servers to function as a transparent proxy
(default).
Sets or remove a specified URL rewrite rule for the
current secure server.
Description
Specifies the maximum amount of time that a
segment can exist on the network before being
discarded.
Specifies the amount of time to wait before sending
a delayed ACK.
Specifies the amount of time to wait after
acknowledgement of an initial FIN prior to closing
the TCP connection.
Specifies the amount of time to keep a TCP
connection open without active traffic.
Specifies the number of keepalives that are sent.
Specifies the interval between keepalives.
Specifies the number of times an unacknowledged
segment is retransmitted.
Specifies the amount of time a TCP connection will
remain open after a peer stops responding.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Command Listing
C-29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Css-11154-ac11000 series

Table of Contents