Table of Contents
Advertisement
Top Level Command Set
Related Commands
show startup-configuration
Usage Guidelines
Related Commands
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-80
no snmp (Configuration Command Set)
snmp access-list (Configuration Command Set)
snmp contact (Configuration Command Set)
snmp default community (Configuration Command Set)
snmp enable (Configuration Command Set)
snmp location (Configuration Command Set)
snmp trap-host (Configuration Command Set)
snmp trap-type enterprise (Configuration Command Set)
snmp trap-type generic (Configuration Command Set)
Displays the startup-configuration on a device.
show startup-configuration
Availability: Serial, Telnet; FIPS Mode (serial only)
Neither keys nor configured passwords are displayed.
Note
copy running-configuration startup-configuration (Privileged Command Set)
copy startup-configuration (Privileged Command Set)
copy startup-configuration running-configuration (Privileged Command Set)
copy to flash (Privileged Command Set)
erase start-up-configuration (Privileged Command Set)
show running-configuration (Privileged Command Set)
Appendix C
Command Summary
78-13124-06
Advertisement
Table of Contents
Troubleshooting
