Configuration Command Set
Usage Guidelines
Related Commands
tlsv1 enable
Usage Guidelines
Related Commands
transparent
Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-136
Availability: Serial, Telnet; FIPS Mode (serial only)
See the section "TCP Tuning Configuration Command Set".
Enables TLS version 1 protocols.
tlsv1 enable
no tlsv1 enable
Availability: Serial, Telnet
Using the no form of the command disables TLS version 1 protocols. You cannot
disable SSL version 2 and 3 and TLS protocols. The command no tlsv1 enable is
not available in FIPS mode.
sslv2 enable (Backend Server Configuration Command Set)
sslv3 enable (Backend Server Configuration Command Set)
Enables the backend server to function as a transparent proxy (default).
transparent
no transparent
Availability: Serial, Telnet; FIPS Mode (serial only)
When transparent proxy behavior is disabled, the device accepts connections on
the IP address of the Secure Content Accelerator rather than on the server address.
The no form of the command is used to disable this behavior.
Appendix C
Command Summary
78-13124-06