Global Configuration Command - Cisco 10000 Series Configuration Manual

Router line card
Hide thumbs Also See for 10000 Series:
Table of Contents

Advertisement

Chapter 1
4-Port OC-3/STM-1 ATM Line Card Configuration

Global Configuration Command

A PVC boilerplate is a PVC description that you can apply to one or more PVCs or interfaces.
To create a PVC boilerplate, use the global configuration mode vc-class atm command:
vc-class atm class_name
Where class_name is any value that describes the VC class.
After you enter the vc-class atm command, you are placed in VC class configuration mode. In this mode,
you describe the action you want the class to take by entering commands and their arguments. These
commands and arguments are described in the
In the following example, an ATM VC class named cambridge is created and defined. This example
shows how to specify that the class uses AAL5+MUX encapsulation and a VBR-NRT PVC.
Router(config)# vc-class atm cambridge
Router(config-vc-class)# encaps aal5mux ip
Router(config-vc-class)# vbr-nrt 30000 20000 128
Router(config-vc-class)# exit
Router(config)#
For information on applying a VC class name, see the
section on page 1-9
Interface and Subinterface Commands
This section describes principal commands for configuring ATM interfaces and subinterfaces. This
section describes the following global configuration commands:
OL-8834-04
and the
"Attaching an ATM VC Class to a PVC" section on page
Creating and Entering Subinterfaces, page 1-8
Attaching an ATM VC Class to an Interface, page 1-9
Creating ATM PVPs, page 1-10
Creating a PVC, page 1-10
Enabling ATM ILMI, page 1-11
Activating ATM ILMI PVC Discovery, page 1-11
Specifying the ATM ILMI Keepalive Rate, page 1-12
Configuring the ATM Clock, page 1-12
Specifying the ATM Flag, page 1-12
Controlling ATM Alarm Reporting, page 1-13
Specifying the ATM Alarm Thresholds, page 1-14
Controlling the S1 SONET Overhead Byte, page 1-14
Running Loopbacks, page 1-15
"ATM PVC Commands" section on page
"Attaching an ATM VC Class to an Interface"
Cisco 10000 Series Router Line Card Configuaration Guide
ATM Commands
1-15.
1-17.
1-7

Advertisement

Table of Contents
loading

Table of Contents