Specifications - Makita VR001C Instruction Manual

Operation
Vibrator does not
start
Model
Output
Voltage
Current
Frequency
Total length
Head
Diameter x Length
External Hose
Diameter x Length
Mass
* Mass does not include power supply equipment such as portable power pack and batteries.
1
► 1. Head Length 2. External hose length 3.Total length
Symptom 1
The power indicator
The LED lamp on the on the portable power
inverter case is not lit. pack is blinking
green.
The LED lamp on the inverter case is
solid red.
The LED lamp on the inverter case is
blinking red.

SPECIFICATIONS

VR001C
250 W
8.7 A
1,945 mm
(76-9/16")
43 x 255 mm
(1-11/16" x 10-1/32")
33 x 1,500 mm
(1-5/16" x 59-1/16")
4.8 kg
(10.6 lbs)
2
3
Symptom 2
Battery power is low.
Or, it is not installed
correctly.
Portable power pack
or power cord is hot.
The plug on the
vibrator is not
properly connected
to the socket on the
portable power pack.
Or, the cable is
disconnected.
The vibrator has
stopped because
a fault has been
detected.
The vibrator's
erroneous start
prevention function is
activated.
VR002C
36 V
200 Hz
3,445 mm
(135-5/8")
33 x 3,000 mm
(1-5/16" x 118-1/8") (1-5/16" x 59-1/16")
5.9 kg
(13.0 lbs)
14 ENGLISH
Cause
Check the battery
level indicator. If
the battery level is
sufficient, check
how the battery is
installed.
Cool the portable
power pack.
Make sure the plug
is firmly connected to
the socket.
In case of
disconnection,
inspection and repair
are required.
Turn the portable
power pack back on.
If the LED lamp lights
up red repeatedly,
inspection and repair
are required.
Turn the vibrator
Operation Switch to
OFF once and then
turn it to ON again.
VR003C
400 W
14.0 A
1,977 mm
(77-27/32")
52 x 287 mm
(2-1/16" x 11-5/16")
33 x 1,500 mm 33 x 3,000 mm
(1-5/16" x 118-1/8")
5.6 kg
(12.4 lbs)
Remedy
VR004C
3,477 mm
(136-7/8")
6.7 kg
(14.8 lbs)