ABB ACQ80 Firmware Manual page 211

Standard program control
Table of Contents

Advertisement

No.
Name/Value
50.07
FBA A actual 1
type
Speed or
frequency
Transparent
General
Speed
Frequency
50.08
FBA A actual 2
type
50.09
FBA A SW
transparent
source
Not selected
Other
50.10
FBA A act1
transparent
source
Not selected
Other
50.11
FBA A act2
transparent
source
50.12
FBA A debug
mode
Disable
Description
Selects the type and scaling of actual value 1
transmitted to the fieldbus network through
fieldbus adapter A. The scaling of the value is
defined by parameters 99.09, 99.08,
depending on which actual value type is
46.04
selected by this parameter.
Type and scaling is chosen automatically
according to the currently active operation mode
as follows.
Motor control mode
(see par. 99.04)
Speed control
Frequency control
No scaling is applied.
Generic reference without a specific unit.
The scaling is defined by parameter
nominal
speed.
The scaling is defined by parameter
nominal
frequency.
Not applicable
Selects the source of the fieldbus status word
when parameter
50.06 FBA A SW sel
Transparent
mode.
No source selected.
Source selection (see
page 80).
When parameter
50.07 FBA A actual 1 type
to Transparent, this parameter selects the source
of actual value 1 transmitted to the fieldbus
network through fieldbus adapter A.
No source selected.
Source selection (see
page 80).
Not applicable
This parameter enables debug mode. Shows raw
(unmodified) data received from and sent to
fieldbus adapter A in parameters 50.13...50.18.
Debug mode disabled.
46.03
Actual 1 type
Speed
Frequency
99.09 Motor
99.08 Motor
is set to
Terms and abbreviations
Terms and abbreviations
Parameters 211
Def/
FbEq16
Speed or
frequency
and
0
1
2
4
5
Not
selected
-
on
-
is set
Not
selected
-
on
-
Disable
0

Advertisement

Table of Contents
loading

Table of Contents