Table of Contents
Advertisement
No.
Name/Value
46
46 Monitoring/scaling
settings
46.01
Speed scaling
0.10...
30000.00 rpm
46.02
Frequency
scaling
0.10...
1000.00 Hz
46.03
Torque scaling
0.1...1000.0%
46.04
Power scaling
0.10 ...
30000.00 kW or
0.10 ...
40200.00 hp
Description
Speed supervision settings; actual signal
filtering; general scaling settings.
Defines the maximum speed value used to define
the acceleration ramp rate and the initial speed
value used to define the deceleration ramp rate
(see parameter group
The speed acceleration and deceleration ramp
times are therefore related to this value (not to
parameter
30.12 Maximum
Also defines the 16-bit scaling of speed-related
parameters. The value of this parameter
corresponds to 20000 in eg. fieldbus
communication.
Acceleration/deceleration terminal/initial speed.
Defines the maximum frequency value used to
define the acceleration ramp rate and the initial
frequency value used to define deceleration ramp
rate (see parameter group
chain). The frequency acceleration and
deceleration ramp times are therefore related to
this value (not to parameter
frequency.
Also defines the 16-bit scaling of frequency-
related parameters. The value of this parameter
corresponds to
20000 in eg. fieldbus communication.
Acceleration/deceleration terminal/initial
frequency.
Defines the 16-bit scaling of torque parameters.
The value of this parameter (in percent of
nominal motor torque) corresponds to 10000 in
eg. fieldbus communication.
Torque corresponding to 10000 on fieldbus.
Defines the output power value that corresponds
to 10000 in eg. fieldbus communication. The unit
is selected by parameter
Power corresponding to 10000 on fieldbus.
23 Speed reference
ramp).
speed).
28 Frequency reference
30.14 Maximum
96.16 Unit
selection.
Parameters 205
Def/
FbEq16
1500.00
rpm
1 = 1 rpm
50.00 Hz
10 = 1 Hz
100.0%
10 = 1%
1000.00
kW or hp
1 = 1 unit
Advertisement
Table of Contents
