ABB ACQ80 Firmware Manual page 101

No. Name/Value
10.03 DI force selection
Bit Value
0 1 = Force DI1 to value of bit 0 of parameter
(0 = Normal mode)
1 1 = Force DI2 to value of bit 1 of parameter
(0 = Normal mode)
2 1 = Force DI3 to value of bit 2 of parameter
(0 = Normal mode)
3 1 = Force DI4 to value of bit 3 of parameter
(0 = Normal mode)
4 1 = Force DI5 to value of bit 4 of parameter
(0 = Normal mode)
5 1 = Force DI6 to value of bit 5 of parameter
(0 = Normal mode)
6...15 Reserved
0b0000...0b1111 Override selection for digital inputs.
10.04 DI forced data
Bit Value
0 Force the value of this bit to D1, if so defined in parameter
force
1 Force the value of this bit to D3, if so defined in parameter
force
2 Force the value of this bit to D3, if so defined in parameter
force
3 Force the value of this bit to D4, if so defined in parameter
force
4 Force the value of this bit to D5, if so defined in parameter
force
5 Force the value of this bit to D6, if so defined in parameter
force
6...15 Reserved
0b0000...0b1111 Forced values of digital inputs.
Description
The electrical statuses of the digital inputs can
be overridden for eg. testing purposes. A bit in
parameter
10.04 DI forced data
each digital input, and its value is applied
whenever the corresponding bit in this
parameter is 1.
Note: Boot and power cycle reset the force
selections (parameters
Allows the data value of a forced digital input to
be changed from 0 to 1. It is only possible to
force an input that has been selected in
parameter
10.03 DI force
Bit 0 is the forced value for DI1; bit 5 is the forced
value for the DI6.
selection.
selection.
selection.
selection.
selection.
selection.
is provided for
and 10.04).
10.03
10.04 DI forced
10.04 DI forced
10.04 DI forced
10.04 DI forced
10.04 DI forced
10.04 DI forced
selection.
Parameters 101
Def/
FbEq16
0b0000
data.
data.
data.
data.
data.
data.
1 = 1
0b0000
10.03 DI
10.03 DI
10.03 DI
10.03 DI
10.03 DI
10.03 DI
1 = 1