Table of Contents
Advertisement
No.
Name/Value
High rising
32.36
Supervision 4
action
No action
Warning
Fault
Fault if running
32.37
Supervision 4
signal
32.38
Supervision 4
filter time
0.000 ...
30.000 s
32.39
Supervision 4
low
-21474836.00...
21474836.00
32.40
Supervision 4
high
-21474836.00...
21474836.00
32.41
Supervision 4
hysteresis
0.00...
100000.00
Description
Action is taken whenever the signal rises from a
value lower than Supervision high limit - (0.5 *
hysteresis) to a value which is higher than
Supervision high' limit + (0.5 * hysteresis).
Action is deactivated when the signal falls to a
value lower than Supervision high limit -
(0.5*hysteresis).
Selects whether the drive generates a fault,
warning or neither when the value monitored by
signal supervision 4 exceeds its limits.
Note: This parameter does not affect the status
indicated by
32.01 Supervision
No warning or fault generated.
Warning
A8B3 Signal supervision 4
Drive trips on fault
80B3 Signal supervision
Drive trips on fault
80B0 Signal supervision 1
motor is running.
Selects the signal to be monitored by signal
supervision function 4.
For the available selections, see parameter
Supervision 1
signal.
Defines a filter time constant for the signal
monitored by signal supervision 4.
Signal filter time.
Defines the lower limit for signal supervision 4.
Low limit.
Defines the upper limit for signal supervision 4.
Upper limit.
Defines the hysteresis for the signal monitored
by signal supervision 4.
Hysteresis.
Parameters 161
status.
is generated.
4.
if the
32.07
Def/
FbEq16
9
No action
0
1
2
3
Zero
0.000 s
1000 = 1 s
0.00
-
0.00
-
0.00
-
Advertisement
Table of Contents
