Categorization By Frame (Size); Cybersecurity Disclaimer - ABB ACQ80 Firmware Manual

16 Introduction to the manual
Term/
abbreviation
PROFIBUS,
PROFIBUS DP,
PROFINET IO
R0, R1,...
RO
Rectifier
STO

Categorization by frame (size)

The ACQ80 is manufactured in several frames (frame sizes), which are denoted
as RN, where N is an integer. Some information which only concern certain
frames are marked with the symbol of the frame (RN).
The frame is marked on the type designation label attached to the drive, see
section Type designation label in the hardware manual of the drive.

Cybersecurity disclaimer

This product is designed to be connected to and to communicate information
and data via a network interface. It is Customer's sole responsibility to provide
and continuously ensure a secure connection between the product and
Customer network or any other network (as the case may be). Customer shall
establish and maintain any appropriate measures (such as but not limited to
the installation of firewalls, application of authentication measures, encryption
of data, installation of anti-virus programs, etc) to protect the product, the
network, its system and the interface against any kind of security breaches,
unauthorized access, interference, intrusion, leakage and/or theft of data or
information. ABB and its affiliates are not liable for damages and/or losses
related to such security breaches, any unauthorized access, interference,
intrusion, leakage and/or theft of data or information.
Explanation
Registered trademarks of PI - PROFIBUS & PROFINET International
Frame (size)
Relay output; interface for a digital output signal. Implemented with
a relay.
Converts alternating current and voltage to direct current and
voltage.
Safe torque off. See chapter
hardware manual of the drive.
The Safe torque off function
in the