Sshcon Maxsessions; Sshcon Timeout; Show Ip Ssh - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

3.4.3 sshcon maxsessions

This command specifies the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range is
0 to 5.
Default
Format
Mode
3.4.3.1 no sshcon maxsessions
This command sets the maximum number of allowed SSH connection sessions to the
default value.
Format
Mode

3.4.4 sshcon timeout

This command sets the SSH connection session timeout value, in minutes. A session is
active as long as the session has been idle for the value set. The time is a decimal value
from 1 to 160.
Changing the timeout value for active sessions does not become effective until the session
is re accessed. Also, any keystroke activates the new timeout duration.
Default
Format
Mode
3.4.4.1 no sshcon timeout
This command sets the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session
is re accessed. Also, any keystroke activates the new timeout duration.
Format
Mode

3.4.5 show ip ssh

This command displays the ssh settings.
3-14
5
sshcon maxsessions <0-5>
Privileged EXEC
no sshcon maxsessions
Privileged EXEC
5
sshcon timeout <1-160>
Privileged EXEC
no sshcon timeout
Privileged EXEC
v1.0, March 2006
Administrative Access Commands