Show Radius Accounting - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Primary Server IP
Address
Number of
configured
servers
Max number of
retransmits
Timeout Duration
Accounting
Mode
If you include the optional
configured RADIUS servers is displayed.
IP Address
Port
Type
Secret
Configured
Message
Authenticator

11.2.9 show radius accounting

This command is used to display the configured RADIUS accounting mode, accounting
server and the statistics for the configured accounting server.
Format
Mode
If the optional token 'statistics
and the RADIUS accounting server details are displayed.
Mode
IP Address
Port
Port-Based Access and Authentication Commands
Shows the configured server currently in use for authentica-
tion.
The configured IP address of the authentication server.
The configured value of the maximum number of times a
request packet is retransmitted.
The configured timeout value, in seconds, for request re-
transmissions.
Yes or No.
parameter, the following information regarding the
[servers]
IP Address of the configured RADIUS server.
The port in use by this server.
Primary or secondary.
Yes / No.
Enables or disables. the message authenticator attribute for
the selected server.
show radius accounting [statistics <ipaddr>]
Privileged EXEC
' is not included, then only the accounting mode
<ipaddr>
Enabled or disabled
The configured IP address of the RADIUS accounting server.
The port in use by the RADIUS accounting server.
v1.0, March 2006
11-17