Show Mac Access-Lists - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
14.7.4.1 no mac access-group
This command removes a MAC ACL identified by
direction.
Format
Modes

14.7.5 show mac access-lists

This command displays a MAC access list and all of the rules that are defined for the
MAC ACL. The [name] parameter is used to identify a specific MAC ACL to display.
Format
Mode
Rule Number
Action
Source MAC
Address
Destination MAC
Address
Ethertype
VLAN ID
COS
Assign Queue
Redirect
Interface
Quality of Service (QoS) Commands
no mac access-list <name> in
Global Config
Interface Config
show mac access-lists [name]
Privileged EXEC
The ordered rule number identifier defined within the MAC
ACL.
Displays the action associated with each rule. The possible
values are Permit or Deny.
Displays the source MAC address for this rule.
Displays the destination MAC address for this rule.
Displays the Ethertype keyword or custom value for this rule.
Displays the VLAN identifier value or range for this rule.
Displays the COS (802.1p) value for this rule.
Displays the queue identifier to which packets matching this
rule are assigned.
Displays the slot/port to which packets matching this rule are
forwarded.
v1.0, March 2006
from the interface in a given
<name>
14-31