Mark Cos; Mark Ip-Dscp - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
14.4.4.1 no class
This command deletes the instance of a particular class and its defined treatment from the
specified policy.
Note: This command removes the reference to the class definition for the
Format
Mode

14.4.5 mark cos

This command marks all packets for the associated traffic stream with the specified class
of service value in the priority field of the 802.1p header (the only tag in a single tagged
packet or the first or outer 802.1Q tag of a double VLAN tagged packet). If the packet
does not already contain this header, one is inserted. The CoS value is an integer from 0 to
7.
Default
Format
Mode
Incompatibilities

14.4.6 mark ip-dscp

This command marks all packets for the associated traffic stream with the specified IP
DSCP value.
The
<dscpval>
through one of the following keywords: af11, af12, af13, af21, af22, af23, af31, af32, af33,
af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef
Format
Mode
Incompatibilities
Quality of Service (QoS) Commands
is the names of an existing DiffServ class.
<classname>
specified policy.
no class <classname>
Policy-Map Config
1
mark-cos <0-7>
Policy-Class-Map Config
Drop, Mark IP DSCP, IP Precedence, Police
value is specified as either an integer from 0 to 63, or symbolically
mark ip-dscp <dscpval>
Policy-Class-Map Config
Drop, Mark CoS, Mark IP Precedence, Police
v1.0, March 2006
.
14-17