Show Logging Buffered; Clear Logging Buffered; Show Logging Hosts - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Log Messages
Received
Log Messages
Dropped

15.3.9 show logging buffered

This command displays buffered logging (system startup and system operation logs).
Format
Mode
Admin Status
Component Filter
Wrapping
Behavior
Log Count

15.3.10 clear logging buffered

This command clears the messages maintained in the system log.
Format
Mode

15.3.11 show logging hosts

This command displays all configured logging hosts.
Format
Mode
Host Index
Severity Level
Port
System Maintenance Commands
The number of messages received by the log process. This
includes messages that are dropped or ignored
The number of messages that could not be processed.
show logging buffered
Privileged EXEC
The current state of the in-memory log.
The component(s) from which received messages are to be
logged to the in memory log. Either a single component id or
"all components" may be specified.
The behavior of the In Memory log when faced with a log
full situation.
The count of valid entries in the buffered log.
clear logging buffered
Privileged EXEC
show logging hosts
Privileged EXEC
(Used for deleting hosts)
The minimum severity to log to the specified address.
Displays the server port number, which is the port on the
local host from which syslog messages are sent.
v1.0, March 2006
15-25