This section describes the management access and basic port configuration commands
available in the 7200 Series Managed Switch CLI.
This section contains the following topics:
•
Section 3.1 "Network Interface Commands" on page 3-1
•
•
•
•
•
The commands in this section are divided into two functional groups:
•
Show commands display switch settings, statistics, and other information.
•
Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
To manage the device by using SNMP, see
3.1 Network Interface Commands
This section describes the commands you use to configure a logical interface for
management access.
Note: The service port commands are for out-of-band network management
Administrative Access Commands
Administrative Access Commands
using the dedicated service port on the platform. The network commands
are used for in-band management using the data ports.
v1.0, March 2006
"SNMP Commands" in Chapter
Chapter 3
10.
3-1