Vlan Ingressfilter; Vlan Makestatic; Vlan Name - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Format
Mode

6.1.5 vlan ingressfilter

This command enables ingress filtering. If ingress filtering is disabled, frames received
with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
Default
Format
Mode
6.1.5.1 no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received
with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
Format
Mode

6.1.6 vlan makestatic

This command changes a dynamically created VLAN (one that is created by GVRP
registration) to a static VLAN (one that is permanently configured and defined). The ID is
a valid VLAN identification number. VLAN range is 2-4094.
Format
Mode

6.1.7 vlan name

This command changes the name of a VLAN. The name is an alphanumeric string of up to
32 characters, and the ID is a valid VLAN identification number. ID range is 1-4094.
Default
Format
Mode
VLAN Commands
vlan acceptframe {vlanonly | all}
Interface Config
disabled
vlan ingressfilter
Interface Config
no vlan ingressfilter
Interface Config
vlan makestatic <2-4094>
VLAN Config
VLAN ID 1 - default; other VLANS - blank string
vlan name <2-4094> <name>
VLAN Config
v1.0, March 2006
6-3