Logout - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Table 15-1. Copy Parameters (continued)
Source
<url>
<url>
<url>
<url>
<url>
<url>
<url>
<url>
<url>
<url>

15.2.11 logout

This command closes the current telnet connection or resets the current serial connection.
Note: Save configuration changes before logging out.
15-20
Destination
nvram:script
<destfilename>
nvram:sshkeydsa
nvram:sshkeyrsa1
nvram:sshkeyrsa1
nvram:sslpemroot
nvram:sslpemserver
nvram:sslpemdhweak
nvram:sslpemdhstron
g
nvram:startup-config
system:image
v1.0, March 2006
Description
Downloads a configuration script file
to the system. During the download
of a configuration script, the copy
command validates the script. In
case of any error, the command lists
all the lines at the end of the
validation process and prompts you
to confirm before copying the script
file.
Downloads an SSH key file. For more
information, see Section 3.4 "Secure
Shell (SSH) Command" on
page 3-13.
Downloads an SSH key file.
Downloads an SSH key file.
Downloads an HTTP secure-server
certificate. For more information, see
Section 3.5 "Hypertext Transfer
Protocol (HTTP) Commands" on
page 3-15.
Downloads an HTTP secure-server
certificate.
Downloads an HTTP secure-server
certificate.
Downloads an HTTP secure-server
certificate.
Downloads the startup configuration
file to the system.
Downloads a code image to the
system.
System Maintenance Commands