Vlan Port Tagging All; Vlan Port Ingressfilter All - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Format
Mode

6.1.12 vlan port tagging all

This command configures the tagging behavior for all interfaces in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The ID is a valid VLAN identification number.
Format
Mode
6.1.12.1 no vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
Format
Mode

6.1.13 vlan port ingressfilter all

This command enables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving
interface are admitted and forwarded to ports that are members of that VLAN.
Default
Format
Mode
6.1.13.1 no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving
interface are admitted and forwarded to ports that are members of that VLAN.
Format
6-6
no vlan port pvid all
Global Config
vlan port tagging all <1-4094>
Global Config
no vlan port tagging all
Global Config
disabled
vlan port ingressfilter all
Global Config
no vlan port ingressfilter all
v1.0, March 2006
VLAN Commands