Show Diffserv - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Values
If you do not specify the Class Name, this command displays a list of all defined DiffServ
classes. The following fields are displayed:
Class Name
Class Type
Ref Class Name

14.6.2 show diffserv

This command displays the DiffServ General Status Group information, which includes
the current administrative mode setting as well as the current and maximum number of
rows in each of the main DiffServ private MIB tables. This command takes no options.
Format
Mode
DiffServ Admin
mode
Class Table Size
Class Table Max
Class Rule Table
Size
Class Rule Table
Max
Policy Table Size
Policy Table Max
Policy Instance
Table Size
14-22
Address, Destination Layer 4 Port, Every, IP DSCP, IP Prece-
dence, IP TOS, Protocol Keyword, Reference Class, Source
IP Address, and Source Layer 4 Port.
This field displays the values of the Match Criteria.
The name of this class. (Note that the order in which classes
are displayed is not necessarily the same order in which they
were created.)
A class type of 'all' means every match criterion defined for
the class is evaluated simultaneously and must all be true to
indicate a class match.
The name of an existing DiffServ class whose match condi-
tions are being referenced by the specified class definition.
show diffserv
Privileged EXEC
The current value of the DiffServ administrative mode.
The current number of entries (rows) in the Class Table.
The maximum allowed entries (rows) for the Class Table.
The current number of entries (rows) in the Class Rule Table.
The maximum allowed entries (rows) for the Class Rule
Table.
The current number of entries (rows) in the Policy Table.
The maximum allowed entries (rows) for the Policy Table.
Current number of entries (rows) in the Policy Instance
Table.
v1.0, March 2006
Quality of Service (QoS) Commands