Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
4.4.6.1 no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the MAC
address of
<macaddr>
specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode
4.4.7 macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC
address of
<macaddr>
byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
must identify a valid VLAN.
Format
Mode
4.4.7.1 no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the
MAC address of
parameter as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode
4.4.8 bridge aging-time
This command configures the forwarding database address aging timeout in seconds. In an
IVL system, the
Default
Format
Mode
Seconds
Port and System Setup Commands
and VLAN of
parameter must identify a valid VLAN.
no macfilter addsrc <macaddr> <vlanid>
Interface Config
and
. You must specify the
<vlanid>
macfilter addsrc {all | <macaddr> <vlanid>}
Global Config
and VLAN of
<macaddr>
parameter must identify a valid VLAN.
no macfilter addsrc {all | <macaddr> <vlanid>}
Global Config
parameter is required.
[fdbid | all]
300
bridge aging-time <10-1,000,000> [fdbid | all]
Global Config
The
<seconds>
1,000,000 seconds.
v1.0, March 2006
. The
<vlanid>
<macaddr>
. You must specify the
<vlanid>
parameter must be within the range of 10 to
parameter must be
parameter as a 6-
<macaddr>
parameter
<vlanid>
<macaddr>
4-17