Bootfile; Domain-Name; Netbios-Name-Server - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Format
Mode

7.1.10 bootfile

The command specifies the name of the default boot image for a DHCP client. The
specifies the boot image file.
<filename>
Default
Format
Mode
7.1.10.1 no bootfile
This command deletes the boot image name.
Format
Mode

7.1.11 domain-name

This command specifies the domain name for a DHCP client. The
domain name string of the client.
Default
Format
Mode
7.1.11.1 no domain-name
This command removes the domain name.
Format
Mode

7.1.12 netbios-name-server

This command configures NetBIOS Windows Internet Naming Service (WINS) name
servers that are available to DHCP clients.
One IP address is required, although one can specify up to eight addresses in one
command line. Servers are listed in order of preference (address1 is the most preferred
server, address2 is the next most preferred server, and so on).
7-6
no network
DHCP Pool Config
none
bootfile <filename>
DHCP Pool Config
no bootfile
DHCP Pool Config
none
domain-name <domain>
DHCP Pool Config
no domain-name
DHCP Pool Config
v1.0, March 2006
specifies the
<domain>
DHCP Commands