Bootpdhcprelay Minwaittime; Bootpdhcprelay Serverip - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
7.4.3.1 no bootpdhcprelay maxhopcount
This command configures the default maximum allowable relay agent hops for BootP/
DHCP Relay on the system.
Format
Mode

7.4.4 bootpdhcprelay minwaittime

This command configures the minimum wait time in seconds for BootP/DHCP Relay on
the system. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY
use the seconds-since-client-began-booting field of the request as a factor in deciding
whether to relay the request or not. The parameter has a range of 0 to 100 seconds.
Default
Format
Mode
7.4.4.1 no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP
Relay on the system.
Format
Mode

7.4.5 bootpdhcprelay serverip

This command configures the server IP Address for BootP/DHCP Relay on the system.
The < > parameter is an IP address in a 4-digit dotted decimal format.
ipaddr
Default
Format
Mode
7.4.5.1 no bootpdhcprelay serverip
This command configures the default server IP Address for BootP/DHCP Relay on the
system.
Format
Mode
7-16
no bootpdhcprelay maxhopcount
Global Config
0
bootpdhcprelay minwaittime <0-100>
Global Config
no bootpdhcprelay minwaittime
Global Config
0.0.0.0
bootpdhcprelay serverip <ipaddr>
Global Config
no bootpdhcprelay serverip
Global Config
v1.0, March 2006
DHCP Commands