Script Validate - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

15.5.5 script validate

This command validates a script file by parsing each line in the script file where
<scriptname>
used as a tool for script development. Validation identifies potential problems. It might not
identify all problems with a given script on any given device.
Format
Mode
System Maintenance Commands
is the name of the script to validate.The validate option is intended to be
script validate <scriptname>
Global Config
v1.0, March 2006
15-29