Show Authentication Users; Show Dot1X - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

11.1.18 show authentication users

This command displays information about the users assigned to the specified
authentication login list. If the login is assigned to non-configured users, the user "default"
will appear in the user column.
Format
Mode
User
Component

11.1.19 show dot1x

This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending
on the tokens used.
Format
Mode
If none of the optional parameters are used, the global dot1x configuration summary is
displayed.
Administrative
mode
If you use the optional
configuration for the specified port or all ports are displayed.
Port
Control Mode
Operating Control
Mode
Reauthentication
Enabled
Port-Based Access and Authentication Commands
show authentication users <listname>
Privileged EXEC
This field displays the user assigned to the specified authenti-
cation login list.
This field displays the component (User or 802.1x) for which
the authentication login list is assigned.
show dot1x [{summary {<slot/port> | all} | {detail
<slot/port>} | {statistics <slot/port>}]
Privileged EXEC
Indicates whether authentication control on the switch is
enabled or disabled.
[summary {<slot/port> | all}]
The interface whose configuration is displayed.
The configured control mode for this port. Possible values are
force-unauthorized | force-authorized | auto.
The control mode under which this port is operating. Possible
values are authorized | unauthorized.
Indicates whether re-authentication is enabled on this port.
v1.0, March 2006
parameter, the dot1x
11-9