Diffserv Show Commands; Show Class-Map (Gsm7248 Only) - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
14.5.1.1 no service-policy
This command detaches a policy from an interface in the inbound direction. The
<policyname>
Note: This command causes a service to remove its reference to the policy. This
Format
Modes

14.6 DiffServ Show Commands

Use the DiffServ show commands to display configuration and status information for
classes, policies, and services. You can display DiffServ information in summary or
detailed formats. The status information is only shown when the DiffServ administrative
mode is enabled.

14.6.1 show class-map (GSM7248 only)

This command displays all configuration information for the specified class. The
is the name of an existing DiffServ class.
name>
Format
Modes
If the class-name is specified the following fields are displayed:
Class Name
Class Type
Match Criteria
Quality of Service (QoS) Commands
parameter is the name of an existing DiffServ policy.
command effectively disables DiffServ on an interface in the inbound
direction. There is no separate interface administrative 'mode' command
for DiffServ.
no service-policy in <policymapname>
Global Config
Interface Config
show class-map <class-name>
Privileged EXEC
User EXEC
The name of this class.
A class type of 'all' means every match criterion defined for
the class is evaluated simultaneously and must all be true to
indicate a class match.
The Match Criteria fields are only displayed if they have
been configured. They are displayed in the order entered by
the user. The fields are evaluated in accordance with the class
type. The possible Match Criteria fields are: Destination IP
v1.0, March 2006
<class-
14-21