Show Logging - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
15.3.7.1 no logging syslog
This command disables syslog logging.
Format
Mode

15.3.8 show logging

This command displays logging.
Format
Mode
Client Local Port
Console Logging
Administrative
Mode
Console Logging
Severity Filter
Buffered Logging
Administrative
Mode
Buffered Logging
Severity Filter
Historical Logging
Administrative
Mode
Historical Logging
Severity Filter
Syslog Logging
Administrative
Mode
15-24
no logging syslog
Global Config
show logging
Privileged EXEC
The port on the collector/relay to which syslog messages are
sent.
The mode for console logging.
The minimum severity to log to the console log. Messages
with an equal or lower numerical severity are logged.
The mode for buffered logging.
The minimum severity to log to the buffered log. Messages
with an equal or lower numerical severity are logged.
The mode for historical logging.
The minimum severity to log to the historical log. Messages
with an equal or lower numerical severity are logged.
The mode for logging to configured syslog hosts. If set to dis-
able logging stops to all syslog hosts.
v1.0, March 2006
System Maintenance Commands